PT. YAMA ENGINEERING , a new growth EPC Contractor in Oil and Gas industry, is immediately seeking highly qualified and experience professional who can work as a team with proven competencies in the whole range of development and improvement initiatives to fill the following positions for:
1. PROJECT MANAGER (SENIOR & JUNIOR)
Graduate Engineering Degree in any discipline
3- 6 Years work experience into EPCI Industries
Good Communication and Project Management Skills.
The Job expect the following skill sets:
Strong Project Management Skills
Strong People Management Skill
Strong Project Execution skill
Strong Project Planning Skills
2. PROCESS ENGINEERS (SENIOR & JUNIOR)
Requirements:
• Education: min. S1 Chemical Engineering Degree.
• Senior: min. 10 years working experience in oil & gas industry.
• Junior: min. 5 years working experience in oil & gas industry.
• Experience of basic engineering, detail engineering, pre-commissioning/ commissioning, start-up for project on Oil & Gas Facilities.
• Expert in Process & Design Simulation, Process Eng. Calculation, HAZID & HAZOP, PFD, Material balance, P&ID, Process Data Sheets, Design and specifications, proposal/project development involving detailed calculation, Process studies, Operating & Shutdown Philosophy, Operating Manual.
• Having knowledge and skill of process engineering software: HYSYS, HTRI, Flaresim, Flarenet and related process engineering software.
3. ELECTRICAL ENGINEERS (SENIOR & JUNIOR)
Requirements:
• Education: min. S1 Electrical Engineering Degree.
• Senior: min. 10 years working experience in oil & gas industry.
• Junior: min. 5 years working experience in oil & gas industry.
• Expert in preparing electrical design, calculations, specifications, data sheets & RFQ.
• Having knowledge and skill of Electrical Engineering Software: ETAP Powerstation, Luxicon, Visual 2.0, PROTEC 2000 and ROCTEX CTM Software.
• Having capability to analyze technical vendor quotation(TBE).
• Having knowledge with International Codes and Standards.
4. INSTRUMENT ENGINEERS (SENIOR & JUNIOR)
Requirements:
• Education: min. S1 Physic/Electrical Engineering Degree.
• Senior: min. 10 years working experience in oil & gas industry.
• Junior: min. 5 years working experience in oil & gas industry.
• Expert in preparing instrument basic design, sizing calculations, specifications, data sheets, RFQ & TBE, preparing pre-commissioning and commissioning procedures.
• Expert in field instrumentation section material such as flow meters, analyzers, gas chromatographs, etc also program logic controller (PLC).
• Having good knowledge and skill of Instrument Engineering software: Ntools ver. 6 & 7, Instrucalc 5.0.
• Having knowledge with International Codes and Standards.
5. STATIC & ROTATING MECHANICAL ENGINEERS (SENIOR & JUNIOR)
Requirements:
• Education: min. S1 Mechanical Engineering Degree.
• Senior: min. 10 years working experience in oil & gas industry.
• Junior: min. 5 years working experience in oil & gas industry.
• Expert in preparing mechanical specifications, data sheets & RFQ.
• Having knowledge with International Codes and Standards related to Design of Static Equipment.
• Having knowledge with calculation software for mechanical calculation: pressure vessel, pumps, compressors, HVAC, air cooler and heat exchanger.
• Having capability to analyze technical vendor quotation (TBE).
6. PIPING ENGINEERS (SENIOR & JUNIOR)
Requirements:
• Education: min. S-1 Mechanical Engineering Degree.
• Senior: min. 10 years working experience in oil & gas industry.
• Junior: min. 5 years working experience in oil & gas industry.
• Good knowledge of piping engineering, piping layout, stress analysis and project management.
• Capable of specifying piping components & familiar with various oil & gas Industry standards for laying out facilities, statutory & insurance guideline for approval of facilities.
• Expert in preparing Piping Specifications, calculations, data sheets & RFQ.
• Having experience to perform site checking of piping system, type of pipe support installed & location in conformance with project construction drawing requirements design instruction & installation procedures.
• Having capability to analyze technical vendor quotation (TBE).
• Having knowledge with International Code & Industry Standard.
7. PIPING STRESS ANALYSIS ENGINEERS (SENIOR & JUNIOR)
Requirements:
• Education: min. S-1 Mechanical Degree.
• Senior: min. 10 years working experience in oil & gas industry.
• Junior: min. 5 years working experience in oil & gas industry.
• Good knowledge of piping engineering & pipe support design.
• Familiar with calculation and preparing reports of piping stress analysis using Autopipe plus or Caesar II 5.2.
• Having capability to analyze technical vendor quotation (TBE).
• Having experience to perform site checking of piping system, type of pipe support installed & location in conformance with project construction drawing requirements design instruction & installation procedures.
8. DESIGN CHECKERS (SENIOR & JUNIOR)
Requirements:
• Discipline: Piping, Mechanical, Electrical, Instrument & Civil/Structural.
• Education: min. Technical/Senior High School + AutoCAD Course.
• Experience: min. 5 years experience in similar position.
• Expert in designing all aspect engineering based on disciplines.
• Good experience to check all drawings/inter-discipline drawings and vendor data.
• Good knowledge on AutoCAD (piping, mechanical, instrument and vessel design).
9. DRAFTSMEN (SENIOR & JUNIOR)
Requirements:
• Discipline: Piping, Mechanical, Electrical, Instrument & Structural.
• Education: Technical/Senior High School + AutoCAD Course.
• Experience: min. 5 years in similar position.
• Good knowledge of discipline engineering drawings.
• Familiar & expert with drawing software (AutoCAD all version – Autoplant/ Isoplant, etc related to the discipline).
• Skilled to prepare drawings on discipline aspect based on design drawings cord. Instructions.
10. PLANNER & SCHEDULERS (SENIOR & JUNIOR)
Requirements:
• Education : min. S1 any discipline of engineering.
• Senior: min. 10 years working experience in oil & gas industry.
• Junior: min. 5 years working experience in oil & gas industry.
• Experience working on projects across a full life cycle from FEED, cost estimation, detailed design, construction and commissioning.
• Fully experience utilizing Primavera software, Microsoft Project or other relevant planning system.
• Able to define milestone, collect information, prepare progress report and compare with project schedule during project execution.
• In depth understanding of Maintenance Work Processes and Principals.
10. PROJECT ENGINEERS (SENIOR & JUNIOR)
Requirements:
• Discipline: Electrical & Instrument, Piping, Mechanical, Civil/Structural.
• Education : min. S1 Degree in Engineering background.
• Senior: min. 10 years working experience in oil & gas industry.
• Junior: min. 5 years working experience in oil & gas industry.
• Good knowledge of project management, estimation, procurement, construction related to process equipment.
• Able to be a “Leader” to direct and manage a project team.
• Able to demonstrate leadership, ownership of works and integrity.
• Able to create and starter plan such as kick off meeting, organization, manpower plan, office facilities and budget plan, IT & permit requirement.
• Having the wide range of understanding on engineering key documents i.e. Plot Plan, PFD, P&ID, General Specification, International Code and Standard, HAZID & HAZOP, etc.
• Having high awareness of Contract/Agreement content including legal implication.
If you meet the requirements, please send your comprehensive resume with recent photograph & contact number in MS Word format only in English with current & expected salary. Please indicate the position as email subject to:
susieboedja@consultant.com or susilaningsih@yamaengineering.com
All applicants will be treated as strictly confidential. Only a short list of candidates will be interviewed.
